Jump to: navigation, search

SECN Firmware Roadmap

Table of SECN Firmwares

Version OpenWrt batman-adv USB WiFi USB 3G Status Notes
SECN 2.0 AA 2013.4 - Yes Available as GA Stable AA Firmware for MP2 Basic and other devices
SECN 2.0 Duo AA 2013.4 Yes Yes Available as GA Stable AA Firmware for MP2 Basic and other devices with USB wifi
SECN 2.1 FXS AA 2013.4 - Yes Available as GA Stable AA Firmware for MP02 Phone
SECN 3.0 BB 2014.2 - Yes Available as GA Stable BB Firmware for MP02 and other devices
SECN 3.0 Duo BB 2014.2 Yes Yes Available as GA Stable BB Firmware for MP02 and other devices with USB wifi
SECN 3.0 FXS BB 2014.2 - Yes Available as GA Stable BB Firmware for MP02-Phone
SECN 4.0 CC 2016.1 - Yes Available as GA Stable CC Firmware for MP02 and other devices
SECN 4.0 DUO CC 2016.1 Yes Yes Available as GA Stable CC Firmware for MP02 and other devices with USB wifi
SECN 4.0 FXS CC 2016.1 - Yes Available as GA Stable CC Firmware for MP02-Phone
SECN 5.0 DD 2016.1 - Yes Available for test DD Firmware for MP02 and other devices
SECN 5.0 DUO DD 2016.1 Yes Yes Available for test DD Firmware for MP02 and other devices with USB wifi
SECN 5.0 FXS DD 2016.1 - Yes Available for test DD Firmware for MP02-Phone
  • Note the 2013.4 and 2014.2 versions of batman-adv are not mesh compatible with each other.

This means that you can not run SECN 2 and SECN 3+ nodes on the same mesh.

  • The 2014.2, 2014.4 and 2016.1 versions of batman-adv are mesh compatible with each other

This means that you can run SECN 3, SECN 4 and SECN 5 nodes on the same mesh, although it is recommended to use the latest stable version on all nodes if possible.